| Product Name | PERMIT | OneGate |
| Global IP Address | 10.10.10.3 | 10.10.10.8 |
| Private IP Address | 192.168.3.1 | 192.168.8.1 |
| Test PC IP Address | 192.168.3.2 | 192.168.8.2 |
| Test Results & Comments | After the 3rd Phase-II Hash is sent, OneGate replies with a Hash, but PERMIT returns an [Informational] on that reply. Even so, encrypted communications are possible.?!?!? |
| IKEVIEW Dump file | per_one1.txt |
| Test Results & Comments | No problems encountered. |
| IKEVIEW Dump file | one_per1.txt |
| PERMIT SA LifeTime | 60 secs |
| OneGate SA LifeTime | 86400 secs |
| Test Results & Comments | After about 5 seconds into the encrypted communications phase, PERMIT sends out one-way PINGs, but they are all timed-out without a response. After about 45 seconds of continuous time-outs, PERMIT sends a re-key request, but it fails. After that, OneGate then re-starts to re-key from Phase I again and the keys are re-established, but then the same time out as described above occurs again. |
| IKEVIEW Dump file | per_one2.txt |
| OneGate SA LifeTime | 15 secs |
| PERMIT SA LifeTime | None |
| Test Results & Comments | Because re-keying is performed from Phase-I, a long time-out pause occurs prior to successful key re-establishment. |
| IKEVIEW Dump file | one_per2.txt |